RC1 Olympus TTL Receiver for AOI LED Flash Trigger and DS Strobes
Enjoy true Olympus RC TTL strobe exposure via fiber optic connection with your compatible Ikelite DS strobe. This Receiver is specifically calibrated for use with AOI Flash Triggers in RC Mode in the following underwater housings:
- AOI UH-EPL10R Underwater Housing for Olympus E-PL9/10
- AOI UH-OM1 Underwater Housing for OM System OM-1
- AOI UH-EM1III Underwater Housing for Olympus OM-D E-M1 III
- AOI UH-EM10 IV Underwater Housing for Olympus E-M10 IV
This Receiver is not intended for use with Ikelite brand underwater housings for the above cameras or for housings where the strobe is triggered directly from the camera’s built-in flash.
With the RC1 TTL Receiver and a compatible camera with RC flash mode, actual exposure data is calibrated and communicated directly by the camera. This is far more accurate and consistent than “slave TTL” modes built into some underwater strobes which watch the camera’s built-in flash and react.
An individual RC1 TTL Receiver and compatible fiber optic cord is needed for each strobe. Use of two strobes requires two receivers. This product attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to a housing bulkhead. This receiver is not compatible with non-Ikelite strobes or non-digital Ikelite strobes.
Specifications:
| Depth Rating | Weight |
|---|---|
| 100 meters | 2.8 gr |
RC Mode TTL Strobe Exposure:
The Sensor makes DS Strobes compatible with the Olympus and Panasonic LUMIX RC flash mode, providing automatic TTL exposure. For accurate performance set the DS strobe to “TTL” and the camera’s flash mode to “RC”. Using the camera’s flash exposure compensation controls to make fine-tuned adjustments to the strobe’s intensity.
Manual Strobe Exposure:
The strobe’s output may be adjusted using the manual power settings built into the strobe (varies by model). Make sure the camera’s flash mode is set to manual. Choose the minimum flash output necessary in the camera to trigger the DS strobe. This will conserve the camera’s battery power.
Camera and Housing Compatibility:
- AOI UH-EPL10R Underwater Housing for Olympus E-PL9/10
- AOI UH-OM1 Underwater Housing for OM System OM-1
- AOI UH-EM1III Underwater Housing for Olympus OM-D E-M1 III
- AOI UH-EM10 IV Underwater Housing for Olympus E-M10 IV
This Receiver is not intended for use with Ikelite brand underwater housings for the above cameras or for housings where the strobe is triggered directly from the camera’s built-in flash.
Strobe and Cord Compatibility:
- Ikelite DS50 above serial # 70000
- Ikelite D51
- Ikelite DS125 above serial # 5000
- Ikelite DS160, DS161, DS162
- Ikelite DS200 above serial # 7163
- Ikelite DS230, DS232
This product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON, or other non-Ikelite strobes.
In the Box:
- TTL receiver
- Connector protector
- Silicone lubricant 1cc tube
